1.0
1.0
CHINT GLOBAL PROJECT REFERENCE
CHINT GLOBAL PROJECT REFERENCE
HONORARY CERTIFICATE
HONORARY CERTIFICATE
3212-15
3024-16
Object
Single-phase power transformer
Object
Single phase auto-transformer
Designation
DF11-120000/750
Serial No.
201504023
Designation
ODFS11-400000/500 251502007 525 / 3 / 230 / 3 / 35,0 kV – 1319,7 / 3012,3 / 3428,6 A - 50 Hz Serial No.
(750 / 3) / 35,0 kV - 277,1 / 3428,6 A - 50 Hz
Client
CHINT Electric Co. Ltd., Shanghai, China CHINT Electric Co. Ltd., Shanghai, China KEMA Nederland B.V., Arnhem, The Netherlands CHINT Electric Co. Ltd., Shanghai, China
Client
CHINT Electric Co., Ltd., Shanghai, China CHINT Electric Co., Ltd., Shanghai, China KEMA Nederland B.V., Arnhem, The Netherlands CHINT Electric Co., Ltd., Shanghai, China
Manufacturer
Manufacturer
Inspected by
Inspected by
Test location
Test location
Date of tests
25 November to 10 December 2015
Date of tests
16 to 23 March 2016
Test specification The type and special tests have been carried out in accordance with IEC 60076- 1 (2011), IEC 60076-2 (2011), IEC 60076-10 (2001) and client’s requirements. The routine tests have been carried out based on IEC 60076-1 (2011) and IEC 60076-3 (2013). Test procedure and test parameters were in accordance with client’s instruction. Remarks The time to chopping for HV terminal was between 2 µs and 3 µs, which was executed according to the agreement and was a client’s instruction. The object passed the tests.
Test specification The routine, type and special tests have been carried out in accordance with IEC 60076-1 (2011), IEC 60076-2 (2011), IEC 60076-3 (2013), IEC 60076-10 (2001) and client’s requirements. Remarks The difference between mean voltage and R.M.S voltage was larger than 3% at 110% of the rated voltage because the generator was not powerful enough. Client didn't specify the guaranteed value for no-load loss and current at 110% of the rated voltage. The object passed the tests.
This report applies only to the object tested. The responsibility for conformity of any object having the same type references as that tested rests with the Manufacturer. This report consists of 79 pages in total.
This report applies only to the object tested. The responsibility for conformity of any object having the same type references as that tested rests with the Manufacturer. This report consists of 94 pages in total.
KEMA Nederland B.V.
KEMA Nederland B.V.
J.P. Fonteijne Executve Vice President KEMA Laboratories
J.P. Fonteijne Executive Vice President KEMA Laboratories
Arnhem, 21 January 2016
Arnhem, 19 April 2016
Copyright: Only integral reproduction of this report is permitted without written permission from DNV GL. Electronic cop may be available and have the status “for information only”. The sealed and bound version of the report is the only vali d version.
ies as PDF or scan of this report
Copyright: Only integral reproduction of this report is permitted without written permission from DNV GL. Electronic copies as PDF or scan of this report may be available and have the status “for information only”. The sealed and bound version of the report is the only valid version.
CHINT
15
14 CHINT
Powered by FlippingBook