Low-voltage Brief Catalogue Intelligent Reactive Power Compensation Controller P -
Intelligent Reactive Power Compensation Controller
103 Low-voltage Brief Catalogue
104
P -
JKF8 Intelligent Low-voltage Reactive Power Compensation Controller
Note
• JKF8 Intelligent Low-Voltage Reactive Power Compensation Controller (hereinafter referred to as ”controller”) is a dedicated controller; which can make compensations for the reactive power of low voltage distribution system; • Operation voltage: 380V±20% or 220V±20%.
JKF8
NWK1-GR Series Low Voltage Reactive Power Compensation Controller
• High measurement accuracy, good effect of reactive power compensation; • Reactive power optimization and grid monitoring; • Harmonic analysis and data transmission; • Sampling working voltage AC (100~800)V, suitable for reactive power compensation for power grids around the world.
NWK1-GR
ZT-830
• Measurement accuracy: Voltage ≤± 0.5% (Within the range of 80%~120% rated voltage); Current ≤± 1% (Within the range of 50%~100% rated current); Power factor ≤± 1.5%; Reactive power ≤± 2%; • Output mode: R485 communication control output to control CHINT 's BAGB Intelligent Capacitor; • Power supply conditions: Working voltage: AC380V ± 20% Rated frequency: 50Hz±5% Power consumption: <5W • Number of networking Intelligent Capacitors: ZT-830GB: Total number of simultaneous compensation Intelligent Capacitors ≤30 sets; ZT-830FB: Phase-splitting compensation Intelligent Capacitors ≤ 10 sets, Simultaneous compensation Intelligent Capacitors ≤ 20 sets.
ZT-830
ZCK
• ZCK Smart Composite Switch is a new type of intelligent control and execution component. This Product is suitable for on-off control of low-voltage reactive power compensation capacitor. After receiving the external control signal, it will automatically find the zero-crossing point through logical judgment to realize the input of voltage zero-crossing and the removal of current zero-crossing without inrush current. The magnetic holding relay is adopted, there is no thyristor in parallel, the power consumption is only at the moment of switching, the contact is not sintered, the power consumption is low, and there is no harmonic injection. At the same time, it has the functions of voltage abnormal protection, phase loss protection, fault self-diagnosis, operation indication and so on. The Switch performance is superior to similar products, especially in terms of product reliability.
ZCK
Powered by FlippingBook