Contactor
Contactor
P-031
P-032
Low Voltage Brief Catalogue
Low Voltage Brief Catalogue
Low Voltage Brief Catalogue Low-voltage Brief Catalogue Contactor Contactor
Contactor Contactor
Low Voltage Brief Catalogue 065 Low-voltage Brief Catalogue
P-032 066
P -
P -
P-031
� The NC8 series AC contactor is used for remote making & breaking circuits, and can also be used with proper thermal overload relay together as an electromagnetic starter to protect circuits from overload. ▪ Rating up to 690V, 500A, AC 50/60Hz ▪ Standard: IEC/EN 60947-4-1 ▪ Utilization category: AC-1, AC-3, AC-4 ▪ Mounting conditions: inclination between mounting plane and vertical plane not exceed ±5° NC8 AC Contactor � The NC8 series AC contactor is used for remote making & breaking circuits, and can also be used with proper thermal overload relay together as an electromagnetic starter to protect circuits from overload. ▪ Rating up to 690V, 500A, AC 50/60Hz ▪ Standard: IEC/EN 60947-4-1 ▪ Utilization category: AC-1, AC-3, AC-4 ▪ Mounting conditions: inclination between mounting plane and vertical plane not exceed ±5° NC8 AC Contactor � The NC8 series AC contactor is used for remote making & breaking circuits, and can also be used with proper thermal overload relay together as an electromagnetic starter to protect circuits from overload. ▪ Rating up to 690V, 500A, AC 50/60Hz ▪ Standard: IEC/EN 60947-4-1 ▪ Utilization category: AC-1, AC-3, AC-4 ▪ Mounting conditions: inclination between mounting plane and vertical plane not exceed ±5° NC8 AC Contactor Contactor NC8 AC Contactor • The NC8 series AC contactor is used for remote making & breaking circuits, and can also be used with proper thermal overload relay together as an electromagnetic starter to protect circuits from overload. • Rating up to 690V, 500A, AC 50/60Hz • Standard: IEC/EN 60947-4-1 • Utilization category: AC-1, AC-3, AC-4 • Mounting conditions: inclination between mounting plane and vertical plane not exceed ±5°
NC1 Contactor
� The NC1 Series Contactor is used in remote motor ( � 45 kW) control application. ▪ Rating up to 690V, 95A (AC-3). ----- (09A, 12A, 18A, 25A, 32A, 40A, 50A, 65A, 80A, 95A) ▪ Standard: IEC/EN 60947-4-1 ▪ Ambient temp:-25℃~+55℃ ▪ Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V, 440V, 480V, 500V, 600V, 660V ▪ Coil voltage (DC): 24V, 36V, 48V, 110V, 220; ▪ Side mounting auxiliary contacts: NCF1-11C (1NO & 1NC) ▪ Top mounting auxiliary contacts: F4-20 & F4-02 & F4-11 (2NO or 2NC or 1NO & 1NC) F4-13 & F4-31 (1NO & 3NC or 3NO & 1NC) F4-40 & F4-04 & F4-22 (4NO or 4NC or 2NO & 2NC) ▪ Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay) ▪ Assemble with Thermal overload Relay NR2 (or NRE8) to be a DOL Starter. ▪ Assemble with another one & F4 & F5 & NR2 (or NRE8) to be a Star-Delta Starter called QJX2; ▪ Assemble with a current limiting block to be a Capacitor Contactor. ▪ Assemble with another one to be a reversing contactor. � The NC1 Series Contactor is used in remote motor ( � 45 kW) control application. ▪ Rating up to 690V, 95A (AC-3). ----- (09A, 12A, 18A, 25A, 32A, 40A, 50A, 65A, 80A, 95A) ▪ Standard: IEC/EN 60947-4-1 ▪ Ambient temp:-25℃~+55℃ ▪ Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V, 440V, 480V, 500V, 600V, 660V ▪ Coil voltage (DC): 24V, 36V, 48V, 110V, 220; ▪ Side mounting auxiliary contacts: NCF1-11C (1NO & 1NC) ▪ Top mounting auxiliary contacts: F4-20 & F4-02 & F4-11 (2NO or 2NC or 1NO & 1NC) F4-13 & F4-31 (1NO & 3NC or 3NO & 1NC) F4-40 & F4-04 & F4-22 (4NO or 4NC or 2NO & 2NC) ▪ Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay) ▪ Assemble with Thermal overload Relay NR2 (or NRE8) to be a DOL Starter. ▪ Assemble with another one & F4 & F5 & NR2 (or NRE8) to be a Star-Delta Starter called QJX2; ▪ Assemble with a current limiting block to be a Capacitor Contactor. ▪ Assemble with another one to be a reversing contactor. � The NC1 Series Contactor is used in remote motor ( � 45 kW) control application. ▪ Rating up to 690V, 95A (AC-3). ----- (09A, 12A, 18A, 25A, 32A, 40A, 50A, 65A, 80A, 95A) ▪ Standard: IEC/EN 60947-4-1 ▪ Ambient temp:-25℃~+55℃ ▪ Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V, 440V, 480V, 500V, 600V, 660V ▪ Coil voltage (DC): 24V, 36V, 48V, 110V, 220; ▪ Side mounting auxiliary contacts: NCF1-11C (1NO & 1NC) ▪ Top mounting auxiliary contacts: F4-20 & F4-02 & F4-11 (2NO or 2NC or 1NO & 1NC) F4-13 & F4-31 (1NO & 3NC or 3NO & 1NC) F4-40 & F4-04 & F4-22 (4NO or 4NC or 2NO & 2NC) ▪ Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay) ▪ Assemble with Thermal overload Relay NR2 (or NRE8) to be a DOL Starter. ▪ Assemble with another one & F4 & F5 & NR2 (or NRE8) to be a Star-Delta Starter called QJX2; ▪ Assemble with a current limiting block to be a Capacitor Contactor. ▪ Assemble with another one to be a reversing contactor. NC1-Z(N) DP Contactor ▪ Used for long-distance circuit making and breaking ▪ Rated working voltage up to 690V, 25A and 40A (AC-3) w/ 2 NO 2 NC main contacts ▪ Compliance standards: IEC / EN 60947-4-1 ▪ Ambient air temperature: -25℃~+55℃, 24-hour average temperature not exceeding +35℃ ▪ Altitude: ≤ 2000m ▪ Coil voltage: DC 48V ▪ Can form into reversible contactor with other AC contactors ▪ Compliance standards: IEC / EN 60947-4-1 ▪ Ambient air temperature: -25℃~+55℃, 24-hour average temperature not exceeding +35℃ ▪ Altitude: ≤ 2000m ▪ Coil voltage: DC 48V ▪ Can form into reversible contactor with other AC contactors NC1-Z(N) DP Contactor ▪ Used for long-distance circuit making and breaking ▪ Rated working voltage up to 690V, 25A and 40A (AC-3) w/ 2 NO 2 NC main contacts NC1-Z(N) DP Contactor ▪ Used for long-distance circuit making and breaking ▪ Rated working voltage up to 690V, 25A and 40A (AC-3) w/ 2 NO 2 NC main contacts NC2 Contactor ▪ Compliance standards: IEC / EN 60947-4-1 ▪ Ambient air temperature: -25℃~+55℃, 24-hour average temperature not exceeding +35℃ ▪ Altitude: ≤ 2000m ▪ Coil voltage: DC 48V ▪ Can form into reversible contactor with other AC contactors � The NC2 Series Contactor is used in remote motor ( � 475kW) control application. � Rating up to 690V, 800A (AC-3). ----- (115A,150A,185A,225A,265A,330A,400A,500A,630A,800A) � Standard: IEC/EN 60947-4-1 � Ambient temp: -5℃~+40℃ � Coil voltage (AC): 110V, 127V, 220V, 230V, 380V, 400V; � Top mounting auxiliary contacts: F4-20 & F4-02 & F4-11 (2NO or 2NC or 1NO & 1NC) F4-13 & F4-31 (1NO & 3NC or 3NO & 1NC) F4-40 & F4-04 & F4-22 (4NO or 4NC or 2NO & 2NC) � Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay) � Assemble with Thermal overload Relay NR2 to be a DOL Starter. � Assemble with another one to be a reversing contactor. � Standard: IEC/EN 60947-4-1 � Ambient temp: -5℃~+40℃ � Coil voltage (AC): 110V, 127V, 220V, 230V, 380V, 400V; � Top mounting auxiliary contacts: F4-20 & F4-02 & F4-11 (2NO or 2NC or 1NO & 1NC) F4-13 & F4-31 (1NO & 3NC or 3NO & 1NC) F4-40 & F4-04 & F4-22 (4NO or 4NC or 2NO & 2NC) � Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay) � Assemble with Thermal overload Relay NR2 to be a DOL Starter. � Assemble with another one to be a reversing contactor. � 475kW) control application. � � � � � F4-13 & F4-31 (1NO & 3NC or 3NO & 1NC) F4-40 & F4-04 & F4-22 (4NO or 4NC or 2NO & 2NC) � • The NC2 Series Contactor is used in remote motor (≤475kW) control application. • Rating up to 690V, 800A (AC-3). ----- (115A,150A,185A,225A,265A,330A,400A,500A,630A,800A) • Standard: IEC/EN 60947-4-1 • Ambient temp: -5 ℃ ~+40 ℃ • Coil voltage (AC): 110V, 127V, 220V, 230V, 380V, 400V; • Top mounting auxiliary contacts: F4-20 & F4-02 & F4-11 (2NO or 2NC or 1NO & 1NC); F4-13 & F4-31 (1NO & 3NC or 3NO & 1NC); F4-40 & F4-04 & F4-22 (4NO or 4NC or 2NO & 2NC) • Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay) • Assemble with Thermal overload Relay NR2 to be a DOL Starter. • Assemble with another one to be a reversing contactor. � The NC2 Series Contactor is used in remote motor ( � 475kW) control application. � Rating up to 690V, 800A (AC-3). ----- (115A,150A,185A,225A,265A,330A,400A,500A,630A,800A) NC2 AC Contactor NC2 Contactor NC1 Contactor Low Voltage Brief Catalogue P-032 Contactor NC1 Contactor • Standard: IEC/EN 60947-4-1 • Ambient temp:-25 ℃ ~+55 ℃ • Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V, 440V, 480V, 500V, 600V, 660V • Coil voltage (DC): 24V, 36V, 48V, 110V, 220; • Side mounting auxiliary contacts: NCF1-11C (1NO & 1NC) • Top mounting auxiliary contacts: F4-20 & F4-02 & F4-11 (2NO or 2NC or 1NO & 1NC); F4-13 & F4-31 (1NO & 3NC or 3NO & 1NC); F4-40 & F4-04 & F4-22 (4NO or 4NC or 2NO & 2NC) • Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay) • Assemble with Thermal overload Relay NR2 (or NRE8) to be a DOL Starter. • Assemble with another one & F4 & F5 & NR2 (or NRE8) to be a Star-Delta Starter called QJX2; • Assemble with a current limiting block to be a Capacitor Contactor. • Assemble with another one to be a reversing contactor. • The NC1 Series Contactor is used in remote motor (≤45kW) control application. • Rating up to 690V, 95A (AC-3). ----- (09A, 12A, 18A, 25A, 32A, 40A, 50A, 65A, 80A, 95A) � Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay) � Assemble with Thermal overload Relay NR2 to be a DOL Starter. � Assemble with another one to be a reversing contactor. NC1 AC Contactor NC1-Z(N) DP Contactor • Used for long-distance circuit making and breaking • Rated working voltage up to 690V, 25A and 40A (AC-3) w/ 2 NO 2 NC main contacts • Compliance standards: IEC / EN 60947-4-1 • Ambient air temperature: -25 ℃ ~+55 ℃ , 24-hour average temperature not exceeding +35 ℃ • Altitude: ≤ 2000m • Coil voltage: DC 48V • Can form into reversible contactor with other AC contactors
P-031
Low Voltage Brief Catalogue
NC8
NC1
NC8 NC8
NC1
NC1
014
R
NC8
NC1
014
R
NC7 AC Contactor NC7 AC Contactor
014
R
▪ The NC7 series AC contactor is mainly used for remotely closing and breaking circuits, and can be combined with an appropriate thermal overload relay to form a electromagnetic starter so as to protect the circuits likely to be overloaded in operation; the contact is well suited for frequently starting and controlling AC motors. ▪ Rating up to 690V, 620A, AC 50/60Hz, usage category of AC-3/400V ▪ This product meets the standard of IEC60947-4-1 ▪ Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V, 440V, 480V, 500V, 600V, 660V ▪ Side mounting auxiliary contacts: NCF1-11C (1NO & 1NC) ▪ Top mounting auxiliary contacts: AX-3-20 & AX-3-02 & AX-3-11 (2NO or 2NC or 1NO & 1NC) AX-3-13 & AX-3-31 (1NO & 3NC or 3NO & 1NC) AX-3-40 & AX-3-04 & AX-3-22 (4NO or 4NC or 2NO & 2NC) ▪ Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay) ▪ Assemble with Thermal overload Relay NR2 (or NRE8) to be a DOL Starter. ▪ Assemble with another one & AX-3 & F5 & NR2 (or NRE8) to be a Star-Delta Starter called QJX2; ▪ Assemble with a current limiting block to be a Capacitor Contactor. ▪ Assemble with another one to be a reversing contactor. NC6 Contactor the contact is well suited for frequently starting and controlling AC motors. ▪ Rating up to 690V, 620A, AC 50/60Hz, usage category of AC-3/400V ▪ This product meets the standard of IEC60947-4-1 ▪ Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V, 440V, 480V, 500V, 600V, 660V ▪ Side mounting auxiliary contacts: NCF1-11C (1NO & 1NC) ▪ Top mounting auxiliary contacts: AX-3-20 & AX-3-02 & AX-3-11 (2NO or 2NC or 1NO & 1NC) AX-3-13 & AX-3-31 (1NO & 3NC or 3NO & 1NC) AX-3-40 & AX-3-04 & AX-3-22 (4NO or 4NC or 2NO & 2NC) ▪ Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay) ▪ Assemble with Thermal overload Relay NR2 (or NRE8) to be a DOL Starter. ▪ Assemble with another one & AX-3 & F5 & NR2 (or NRE8) to be a Star-Delta Starter called QJX2; ▪ Assemble with a current limiting block to be a Capacitor Contactor. ▪ Assemble with another one to be a reversing contactor. � The NC6 Series Mini Contactor is used in remote motor ( � 4kW) control application. � Rating up to 690V, 9A (AC-3). ----- (06A, 09A) � Standard: IEC/EN 60947-4-1 � Two kinds of mounting available: Normal type (without pins); Pin type (with pins) � Ambient temp: -5℃~+40℃ � Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 400V; � Auxiliary contacts: NCF6-20 & NCF6-02 (2NO or 2NC) NCF6-13 & NCF6-31 (1NO & 3NC or 3NO & 1NC) NCF6-40 & NCF6-04 (4NO or 4NC) � Assemble with Thermal overload Relay NR2-11.5 to be a DOL Starter. � The NC6 Series Mini Contactor is used in remote motor ( � 4kW) control application. � Rating up to 690V, 9A (AC-3). ----- (06A, 09A) � Standard: IEC/EN 60947-4-1 � Two kinds of mounting available: Normal type (without pins); Pin type (with pins) � Ambient temp: -5℃~+40℃ � Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 400V; � Auxiliary contacts: NCF6-20 & NCF6-02 (2NO or 2NC) NCF6-13 & NCF6-31 (1NO & 3NC or 3NO & 1NC) NCF6-40 & NCF6-04 (4NO or 4NC) � Assemble with Thermal overload Relay NR2-11.5 to be a DOL Starter. the contact is well suited for frequently starting and controlling AC motors. ▪ Rating up to 690V, 620A, AC 50/60Hz, usage category of AC-3/400V ▪ This product meets the standard of IEC60947-4-1 ▪ Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V, 440V, 480V, 500V, 600V, 660V ▪ Side mounting auxiliary contacts: NCF1-11C (1NO & 1NC) ▪ Top mounting auxiliary contacts: AX-3-20 & AX-3-02 & AX-3-11 (2NO or 2NC or 1NO & 1NC) AX-3-13 & AX-3-31 (1NO & 3NC or 3NO & 1NC) AX-3-40 & AX-3-04 & AX-3-22 (4NO or 4NC or 2NO & 2NC) ▪ Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay) ▪ Assemble with Thermal overload Relay NR2 (or NRE8) to be a DOL Starter. ▪ Assemble with another one & AX-3 & F5 & NR2 (or NRE8) to be a Star-Delta Starter called QJX2; ▪ Assemble with a current limiting block to be a Capacitor Contactor. ▪ Assemble with another one to be a reversing contactor. ▪ The NC7 series AC contactor is mainly used for remotely closing and breaking circuits, and can be combined with an appropriate thermal overload relay to form a electromagnetic starter so as to protect the circuits likely to be overloaded in operation; NC7 AC Contactor • Top mounting auxiliary contacts: AX-3-20 & AX-3-02 & AX-3-11 (2NO or 2NC or 1NO & 1NC); AX-3-13 & AX-3-31 (1NO & 3NC or 3NO & 1NC); AX-3-40 & AX-3-04 & AX-3-22 (4NO or 4NC or 2NO & 2NC) • Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay) • Assemble with Thermal overload Relay NR2 (or NRE8) to be a DOL Starter. • Assemble with another one & AX-3 & F5 & NR2 (or NRE8) to be a Star-Delta Starter called QJX2; • Assemble with a current limiting block to be a Capacitor Contactor. • Assemble with another one to be a reversing contactor. NC7 AC Contactor • The NC7 series AC contactor is mainly used for remotely closing and breaking circuits, and can be combined with an appropriate thermal overload relay to form a electromagnetic starter so as to protect the circuits likely to be overloaded in operation; the contact is well suited for frequently starting and controlling AC motors. • Rating up to 690V, 620A, AC 50/60Hz, usage category of AC-3/400V • This product meets the standard of IEC60947-4-1 • Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V, 440V, 480V, 500V, 600V, 660V • Side mounting auxiliary contacts: NCF1-11C (1NO & 1NC) NC6 Contactor • The NC6 Series Mini Contactor is used in remote motor (≤4kW) control application. • Rating up to 690V, 9A (AC-3). ----- (06A, 09A) • Standard: IEC/EN 60947-4-1 • Two kinds of mounting available: Normal type (without pins); Pin type (with pins) • Ambient temp: -5 ℃ ~+40 ℃ • Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 400V; • Auxiliary contacts: NCF6-20 & NCF6-02 (2NO or 2NC); NCF6-13 & NCF6-31 (1NO & 3NC or 3NO & 1NC); NCF6-40 & NCF6-04 (4NO or 4NC) • Assemble with Thermal overload Relay NR2-11.5 to be a DOL Starter. ▪ The NC7 series AC contactor is mainly used for remotely closing and breaking circuits, and can be combined with an appropriate thermal overload relay to form a electromagnetic starter so as to protect the circuits likely to be overloaded in operation; NC6 Contactor � The NC6 Series Mini Contactor is used in remote motor ( � 4kW) control application. � Rating up to 690V, 9A (AC-3). ----- (06A, 09A) � Standard: IEC/EN 60947-4-1 � Two kinds of mounting available: Normal type (without pins); Pin type (with pins) � Ambient temp: -5℃~+40℃ � Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 400V; � Auxiliary contacts: NCF6-20 & NCF6-02 (2NO or 2NC) NCF6-13 & NCF6-31 (1NO & 3NC or 3NO & 1NC) NC6 AC Contactor
NC1-Z(N) DP
NC7
NC7
NC1-Z(N) DP
NC1-Z(N) DP
NC7
NC1-Z(N) DP
NC7
NC2
014
NC6
NC2
NC6
NC2
R
014
014 014
R
R
R
NC6
014
NC6
R
Powered by FlippingBook