CHINT Low-voltage Brief Catalogue

Overload Relay, Starter

Starter

P-035

P-036

Low Voltage Brief Catalogue 069 Low-voltage Brief Catalogue

Low Voltage Brief Catalogue

Low-voltage Brief Catalogue Starter

Overload Relay, Starter Overload Relay, Starter

070

P -

Starter

P-035

P-036

Low Voltage Brief Catalogue

Overload Relay, Starter NR2 Thermal Overload Relay NR2 Thermal Overload Relay NR2 Thermal Overload Relay

NQ3 DOL Electromagnetic Starter NQ3 DOL Electromagnetic Starter

Starter

P-035

Low Voltage Brief Catalogue ▪ The NQ3 Series DOL Motor Starter is used in remote motor ( ≤11 kW) start & control application. ▪ Rating up to 660V, 22A (AC-3). ----- (0.1~0.16A,0.16~0.25A,0.25~0.4A,0.4~0.63A, 0.63~1A,1~1.6A,1.25~2A,1.6~2.5A,2.5~4A,4~6A,5.5~8A,7~10A,9~13A,12~18A, 17~25A) ▪ Standard: IEC/EN 60947-4-1 ▪ Ambient temp: -5℃~+40℃ ▪ Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V; NQ2-5.5P: Rating current 12A (AC-3), Motor power (start & control) ≤ 5.5 kW (400V) NQ2-11P: Rating current 22A (AC-3), Motor power (start & control) ≤ 11 kW (400V) Note: P (with pushbutton) ▪ Standard: IEC/EN 60947-4-1 ▪ Ambient temp: -5℃~+40℃ ▪ Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V; NQ2-5.5P: Rating current 12A (AC-3), Motor power (start & control) ≤ 5.5 kW (400V) NQ2-11P: Rating current 22A (AC-3), Motor power (start & control) ≤ 11 kW (400V) Note: P (with pushbutton) ▪ Standard: IEC/EN 60947-4-1 ▪ Ambient temp: -5℃~+40℃ ▪ Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V; NQ2-5.5P: Rating current 12A (AC-3), Motor power (start & control) ≤ 5.5 kW (400V) NQ2-11P: Rating current 22A (AC-3), Motor power (start & control) ≤ 11 kW (400V) Note: P (with pushbutton) NQB1 Series Protection Starter NQB1 Series Protection Starter NQB1 Protection Starter NQ3 DOL Electromagnetic Starter ▪ The NQ3 Series DOL Motor Starter is used in remote motor ( ≤11 kW) start & control application. ▪ Rating up to 660V, 22A (AC-3). ----- (0.1~0.16A,0.16~0.25A,0.25~0.4A,0.4~0.63A, 0.63~1A,1~1.6A,1.25~2A,1.6~2.5A,2.5~4A,4~6A,5.5~8A,7~10A,9~13A,12~18A, 17~25A) ▪ Rating up to 660V, 22A (AC-3). ----- (0.1~0.16A,0.16~0.25A,0.25~0.4A,0.4~0.63A, 0.63~1A,1~1.6A,1.25~2A,1.6~2.5A,2.5~4A,4~6A,5.5~8A,7~10A,9~13A,12~18A, 17~25A) • Rating up to 660V, 22A (AC-3). ----- (0.1~0.16A,0.16~0.25A,0.25~0.4A,0.4~0.63A , 0.63~1A,1~1.6A,1.25~2A,1.6~2.5A,2.5~4A,4~6A,5.5~8A,7~10A,9~13A,12~18A, 17~25A) • Standard: IEC/EN 60947-4-1 • Ambient temp: -5 ℃ ~+40 ℃ • Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V; NQ2-5.5P: Rating current 12A (AC-3), Motor power (start & control) ≤ 5.5kW (400V) NQ2-11P: Rating current 22A (AC-3), Motor power (start & control) ≤ 11kW (400V) • Note: P (with pushbutton) ▪ The NQB1 Series Motor Starter is used in remote motor ( ≤7.5 kW) control & protection application. ▪ Rating up to 690V/18A (AC-3): 0.1~0.16A, 0.16~0.25A, 0.25~0.4A, 0.4~0.63A, 0.63~1A, 1~1.6A, 1.6~2.5A, 2.5~4A, 4~6.3A, 6~10A, 9~14A, 13~18A ▪ Standard: IEC60947-4-1 ▪ The NQB1 Series Motor Starter is used in remote motor ( ≤7.5 kW) control & protection application. ▪ Rating up to 690V/18A (AC-3): 0.1~0.16A, 0.16~0.25A, 0.25~0.4A, 0.4~0.63A, 0.63~1A, 1~1.6A, 1.6~2.5A, 2.5~4A, 4~6.3A, 6~10A, 9~14A, 13~18A ▪ Standard: IEC60947-4-1 NQB1 Series Protection Starter ▪ Ambient temperature: -5℃~+40℃ ▪ Coil voltage (AC): 110V, 220, 380V ▪The NQB1 Series Motor Starter is used in remote motor ( • The NQB1 Series Motor Starter is used in remote motor (≤7.5kW) control & protection application. • Rating up to 690V/18A (AC-3): 0.1~0.16A, 0.16~0.25A, 0.25~0.4A, 0.4~0.63A, 0.63~1A, 1~1.6A, 1.6~2.5A, 2.5~4A, 4~6.3A, 6~10A, 9~14A, 13~18A • Standard: IEC60947-4-1 ≤ 7.5kW) control & protection application. ▪ Rating up to 690V/18A (AC-3): 0.1~0.16A, 0.16~0.25A, 0.25~0.4A, 0.4~0.63A, 0.63~1A, 1~1.6A, 1.6~2.5A, 2.5~4A, 4~6.3A, 6~10A, 9~14A, 13~18A ▪ Standard: IEC60947-4-1 • Ambient temperature: -5 ℃ ~+40 ℃ • Coil voltage (AC): 110V, 220, 380V ▪ Ambient temperature: -5℃~+40℃ ▪ Coil voltage (AC): 110V, 220, 380V ▪ The NQ3 Series DOL Motor Starter is used in remote motor ( ≤11 kW) start & control application. • The NQ3 Series DOL Motor Starter is used in remote motor (≤11kW) start & control application. NQ3 DOL Electromagnetic Starter P-036

Low Voltage Brief Catalogue

• NR2 series thermal overload relay is used to provide overload and phase failure protection for AC motors. • Rating up to 690V, 630A. ----- (11.5A, 25A, 36A, 93A, 150A)

NR2 Thermal Overload Relay � NR2 series thermal overload relay is used to provide overload and phase failure protection for AC motors. � Rating up to 690V, 630A. ----- (11.5A, 25A, 36A, 93A, 150A, 200A, 630A) � NR2 series thermal overload relay is used to provide overload and phase failure protection for AC motors. � Rating up to 690V, 630A. ----- (11.5A, 25A, 36A, 93A, 150A, 200A, 630A) � NR2 series thermal overload relay is used to provide overload and phase failure protection for AC motors. � Rating up to 690V, 630A. ----- (11.5A, 25A, 36A, 93A, 150A, 200A, 630A) � Standard: IEC/EN 60947-4-1 � Ambient temp: -5℃~+40℃ � Assemble with Contactor NC1, NC2, NC7 to be a DOL Starter. � Standard: IEC/EN 60947-4-1 � Ambient temp: -5℃~+40℃ � Assemble with Contactor NC1, NC2, NC7 to be a DOL Starter. • Standard: IEC/EN 60947-4-1 • Ambient temp: -5 ℃ ~+40 ℃ • Assemble with Contactor NC1, NC2, NC7 to be a DOL Starter.

NQ3

NR2

NQ3

NR2

� Standard: IEC/EN 60947-4-1 � Ambient temp: -5℃~+40℃ � Assemble with Contactor NC1, NC2, NC7 to be a DOL Starter.

NQ3

NR2

NS2 Manual Motor Starter NS2 Manual Motor Starter

▪ The NS2 Series Manual Motor Starter is used in remote motor control application for overload, short circuit & phase failure. ▪ Rating up to 690V, 80A(AC-3). ----- (0.1~0.16A, 0.16~0.25A, 0.25~0.4A, 0.4~0.63A, 0.63~1A, 1~1.6A, 1.6~2.5A, 2.5~4A, 4~6.3A, 6~10A, 9~14A, 13~18A, 17~23A, 20~25A, 24~32A, 16~25A, 25~40A, 40~63A, 56~80A) ▪ Standard: IEC/EN 60947-2, IEC/EN 60947-4-1 ▪ Ambient temp: -5℃~+40℃ ▪ Side mounting auxiliary contacts: NS2-AU20(2NO) NS2-AU11(1NO & 1NC) ▪ Front mounting auxiliary contacts: NS2-AE20(2NO) NS2-AE11(1NO & 1NC) ▪ Under-voltage release: NS2-UV110, NS2-UV220, NS2-UV380; ▪ Shunt release: NS2-SH110, NS2-SH220, NS2-SH380; ▪ Fault signal contact & instantaneous auxiliary contact: NS2-FA0110 (1NC &1NO) ▪ The NS2 Series Manual Motor Starter is used in remote motor control application for overload, short circuit & phase failure. ▪ Rating up to 690V, 80A(AC-3). ----- (0.1~0.16A, 0.16~0.25A, 0.25~0.4A, 0.4~0.63A, 0.63~1A, 1~1.6A, 1.6~2.5A, 2.5~4A, 4~6.3A, 6~10A, 9~14A, 13~18A, 17~23A, 20~25A, 24~32A, 16~25A, 25~40A, 40~63A, 56~80A) ▪ Standard: IEC/EN 60947-2, IEC/EN 60947-4-1 ▪ Ambient temp: -5℃~+40℃ ▪ Side mounting auxiliary contacts: NS2-AU20(2NO) NS2-AU11(1NO & 1NC) ▪ Front mounting auxiliary contacts: NS2-AE20(2NO) NS2-AE11(1NO & 1NC) ▪ Under-voltage release: NS2-UV110, NS2-UV220, NS2-UV380; ▪ Shunt release: NS2-SH110, NS2-SH220, NS2-SH380; ▪ Fault signal contact & instantaneous auxiliary contact: NS2-FA0110 (1NC &1NO) ▪ The NS2 Series Manual Motor Starter is used in remote motor control application for overload, short circuit & phase failure. ▪ Rating up to 690V, 80A(AC-3). ----- (0.1~0.16A, 0.16~0.25A, 0.25~0.4A, 0.4~0.63A, 0.63~1A, 1~1.6A, 1.6~2.5A, 2.5~4A, 4~6.3A, 6~10A, 9~14A, 13~18A, 17~23A, 20~25A, 24~32A, 16~25A, 25~40A, 40~63A, 56~80A) ▪ Standard: IEC/EN 60947-2, IEC/EN 60947-4-1 ▪ Ambient temp: -5℃~+40℃ ▪ Side mounting auxiliary contacts: NS2-AU20(2NO) NS2-AU11(1NO & 1NC) ▪ Front mounting auxiliary contacts: NS2-AE20(2NO) NS2-AE11(1NO & 1NC) ▪ Under-voltage release: NS2-UV110, NS2-UV220, NS2-UV380; ▪ Shunt release: NS2-SH110, NS2-SH220, NS2-SH380; ▪ Fault signal contact & instantaneous auxiliary contact: NS2-FA0110 (1NC &1NO) NS2 Manual Motor Starter • The NS2 Series Manual Motor Starter is used in remote motor control application for overload, short circuit & phase failure. • Rating up to 690V, 80A(AC-3). ----- (0.1~0.16A, 0.16~0.25A, 0.25~0.4A, 0.4~0.63A, 0.63~1A, 1~1.6A, 1.6~2.5A, 2.5~4A, 4~6.3A, 6~10A, 9~14A, 13~18A, 17~23A, 20~25A, 24~32A, 16~25A, 25~40A, 40~63A, 56~80A) • Standard: IEC/EN 60947-2, IEC/EN 60947-4-1 • Ambient temp: -5 ℃ ~+40 ℃ NS2-FA0101 (1NC & 1NC) NS2-FA1010 (1NO & 1NO) NS2-FA1001 (1NO & 1NC) NS2 Manual Motor Starter • Side mounting auxiliary contacts: NS2-AU20(2NO); NS2-AU11(1NO & 1NC) • Front mounting auxiliary contacts: NS2-AE20(2NO); NS2-AE11(1NO & 1NC) • Under-voltage release: NS2-UV110, NS2-UV220, NS2-UV380; • Shunt release: NS2-SH110, NS2-SH220, NS2-SH380; • Fault signal contact & instantaneous auxiliary contact: NS2-FA0110 (1NC &1NO); NS2- FA0101 (1NC & 1NC); NS2-FA1010 (1NO & 1NO); NS2-FA1001 (1NO & 1NC) • Conversion connector: CC-2(NS2); CC-3(NS2)

NS2

NQB1

014

NQB1

NS2

NQB1

014

▪ Ambient temperature: -5℃~+40℃ ▪ Coil voltage (AC): 110V, 220, 380V

NKB1 Control&Protection Switching Device � The NKB1 series CPS is used in remote motor control & protection application. � Rating up to 690V/125A(AC-3): 0.4~1A,1.2~3A,2.4~6A,4.8~12A,6.4~16A,10~25A,12.8~32A, 18~45A,25~63A,32~80A,40~100A,50~125A � Ambient temperature: -5℃~+40℃ � Coil voltage(AC): 230, 400 NKB1 Control & Protection Switching Device � The NKB1 series CPS is used in remote motor control & protection application. � Rating up to 690V/125A(AC-3): 0.4~1A,1.2~3A,2.4~6A,4.8~12A,6.4~16A,10~25A,12.8~32A, 18~45A,25~63A,32~80A,40~100A,50~125A � Ambient temperature: -5℃~+40℃ � Coil voltage(AC): 230, 400 � The NKB1 series CPS is used in remote motor control & protection application. � Rating up to 690V/125A(AC-3): 0.4~1A,1.2~3A,2.4~6A,4.8~12A,6.4~16A,10~25A,12.8~32A, 18~45A,25~63A,32~80A,40~100A,50~125A � Ambient temperature: -5℃~+40℃ � Coil voltage(AC): 230, 400 • The NKB1 series CPS is used in remote motor control & protection application. • Rating up to 690V/125A(AC-3): 0.4~1A,1.2~3A,2.4~6A,4.8~12A,6.4~16A,10~25A,12.8 ~32A, 18~45A,25~63A,32~80A,40~100A,50~125A • Ambient temperature: -5 ℃ ~+40 ℃ • Coil voltage(AC): 230, 400 NTB 1 Circuit - breaker for Equipment � The circuit-breaker for equipment is used to in the control of the equipment for overload function � Rating up to AC250V, DC32V, 3A � Standard: IEC/EN 60934, UL1077 and CSA C22.2 No.235 NTB1 Circuit - breaker for Equipment � The circuit-breaker for equipment is used to in the control of the equipment for overload function � Rating up to AC250V, DC32V, 3A � Standard: IEC/EN 60934, UL1077 and CSA C22.2 No.235 � The circuit-breaker for equipment is used to in the control of the equipment for overload function � Rating up to AC250V, DC32V, 3A � Standard: IEC/EN 60934, UL1077 and CSA C22.2 No.235 NKB1 Control&Protection Switching Device NKB1 Control&Protection Switching Device NTB 1 Circuit - breaker for Equipment

NS2-FA0101 (1NC & 1NC) NS2-FA1010 (1NO & 1NO) NS2-FA1001 (1NO & 1NC) NS2-FA0101 (1NC & 1NC) NS2-FA1010 (1NO & 1NO) NS2-FA1001 (1NO & 1NC)

▪ Conversion connector: CC-2(NS2) CC-3(NS2) ▪ Conversion connector: CC-2(NS2) CC-3(NS2)

▪ Conversion connector: CC-2(NS2) CC-3(NS2) NQ2 Direct On-line Motor Starter NQ2 DOL Electromagnetic Starter NQ2 Direct On-line Motor Starter start & control application. ▪ Rating up to 660V, 68A (AC-3).----- (0.1~0.16A,0.16~0.25A,0.25~0.4A,0.4~0.63A, 0.63~1A,1~1.6A,1.25~2A,1.6~2.5A,2.5~4A,4~6A,5.5~8A,7~10A,9~13A,12~18A, 17~25A,23~32A,28~36A,30~40A,37~50A,48~65A,55~70A,63~80A,80~93A) ▪ The NQ2 Series DOL Motor Starter is used in remote motor ( ≤33 kW) start & control application. NQ2 Direct On-line Motor Starter The NQ2 Series DOL Motor Starter is used in remote motor ( ▪ ≤ 33kW)

NKB1

• The NQ2 Series DOL Motor Starter is used in remote motor (≤33kW) start & control application.

The NQ2 Series DOL Motor Starter is used in remote motor ( ▪ Standard: IEC/EN 60947-4-1 ▪ Ambient temp: -5℃~+40℃ ▪ Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V; NQ2-15(P, N, NB)/1: Rating current 12A (AC-3), ≤ 5.5kW Motor power (start & control) ≤ 33 kW Note: P (with pushbutton), N (reversing), NB (reversing but without thermal relay) ▪ Standard: IEC/EN 60947-4-1 ▪ Ambient temp: -5℃~+40℃ ▪ Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V; NQ2-15(P, N, NB)/1: Rating current 12A (AC-3), Motor power (start & control) ≤5.5 kW NQ2-15(P, N, NB)/2: Rating current 18A (AC-3), Motor power (start & control) ≤7.5 kW NQ2-15(P, N, NB)/3: Rating current 25A (AC-3), Motor power (start & control) ≤11 kW NQ2-15(P, N, NB)/4: Rating current 32A (AC-3), Motor power (start & control) ≤15 kW NQ2-33(P)/1: Rating current 52A (AC-3), Motor power (start & control) ≤25 kW NQ2-33(P)/2: Rating current 68A (AC-3), Motor power (start & control) NQ2-33(P)/2: Rating current 68A (AC-3), Motor power (start & control) NQ2-33(P)/1: Rating current 52A (AC-3), Motor power (start & control) NQ2-15(P, N, NB)/4: Rating current 32A (AC-3), Motor power (start & control) NQ2-15(P, N, NB)/3: Rating current 25A (AC-3), NQ2-33(P)/2: Rating current 68A (AC-3), NQ2-15(P, N, NB)/1: Rating current 12A (AC-3), Motor power (start & control)≤5.5kW NQ2-15(P, N, NB)/2: Rating current 18A (AC-3), Motor power (start & control)≤7.5kW NQ2-15(P, N, NB)/3: Rating current 25A (AC-3), Motor power (start & control)≤11kW NQ2-15(P, N, NB)/4: Rating current 32A (AC-3), Motor power (start & control)≤15kW NQ2-33(P)/1: Rating current 52A (AC-3), Motor power (start & control)≤25kW NQ2-33(P)/2: Rating current 68A (AC-3), Motor power (start & control)≤33kW • Note: P (with pushbutton), N (reversing), NB (reversing but without thermal relay) ≤ 11 kW 33 Note: P (with pushbutton), N (reversing), NB (reversing but without thermal relay) Motor power (start & control) NQ2-15(P, N, NB)/2: Rating current 18A (AC-3), ▪ Standard: IEC/EN 60947-4-1 ▪ Ambient temp: -5℃~+40℃ ▪ Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V; NQ2-15(P, N, NB)/1: Rating current 12A (AC-3), ≤ 5.5kW start & control application. ▪ Rating up to 660V, 68A (AC-3).----- (0.1~0.16A,0.16~0.25A,0.25~0.4A,0.4~0.63A, 0.63~1A,1~1.6A,1.25~2A,1.6~2.5A,2.5~4A,4~6A,5.5~8A,7~10A,9~13A,12~18A, 17~25A,23~32A,28~36A,30~40A,37~50A,48~65A,55~70A,63~80A,80~93A) Motor power (start & control) NQ2-15(P, N, NB)/3: Rating current 25A (AC-3), ≤ 7.5 kW Motor power (start & control) NQ2-15(P, N, NB)/2: Rating current 18A (AC-3), ≤ 25kW ≤ 15kW ▪ ≤ 33kW) • Standard: IEC/EN 60947-4-1 • Ambient temp: -5 ℃ ~+40 ℃ • Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V; ≤ 7.5 kW 25kW Motor power (start & control) NQ2-33(P)/1: Rating current 52A (AC-3), Motor power (start & control) NQ2-15(P, N, NB)/4: Rating current 32A (AC-3), ≤ 15kW ≤ 11 kW ▪ Rating up to 660V, 68A (AC-3).----- (0.1~0.16A,0.16~0.25A,0.25~0.4A,0.4~0.63A, 0.63~1A,1~1.6A,1.25~2A,1.6~2.5A,2.5~4A,4~6A,5.5~8A,7~10A,9~13A,12~18A, 17~25A,23~32A,28~36A,30~40A,37~50A,48~65A,55~70A,63~80A,80~93A) • Rating up to 660V, 68A (AC-3).----- (0.1~0.16A,0.16~0.25A,0.25~0.4A,0.4~0.63A , 0.63~1A,1~1.6A,1.25~2A,1.6~2.5A,2.5~4A,4~6A,5.5~8A,7~10A,9~13A,12~18A, 17~25A,23~32A,28~36A,30~40A,37~50A,48~65A,55~70A,63~80A,80~93A)

NKB1

NQ2

NKB1

NQ2

NTB1